The XTENDEX® Dual Monitor 4K 10.2Gbps HDMI USB KVM Over IP Extender provides remote KVM (USB keyboard, USB mouse, and two 4Kx2K 30Hz HDMI monitors) access to a dual-head USB computer up to 492 feet (150 meters) via two CAT6/6a/7 cables.
The local and remote units can be connected together for a Point-to-Point connection via CATx cable, or a Point-to-Many or Many-to-Many connection via a managed Gigabit network switch.
· Supports Ultra-HD 4Kx2K resolutions to 3840x2160 (30Hz), 2K resolution 2048x1080, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
o Extend 4Kx2K up to 492 feet in a Point-to-Point connection.
o Extend 4Kx2K up to 984 feet in a Point-to-Point, Point-to-Many, or Many-to-Many connection via a managed Gigabit network switch.
o The max length between most switches and the local/remote unit is 492 feet.
o The switch itself will determine the maximum distance.
· HDMI features supported:
o HDMI 1.4
o x.v.Color, sYCC601 color, Adobe RGB Color and Adobe YCC601 color
o Dolby TrueHD, LPCM 7.1, DTS-HD Master Audio, Dolby Digital, and DTS
o Bandwidth up to 340 MHz (10.2 Gbps)
o Lip Sync
· HDCP 1.4 compliant.
· USB ports for keyboard, mouse, flash drive, HDD or touchscreen display.
o Two USB 2.0 and two USB 1.1 connectors.
o Keyboard and mouse are hot-pluggable.
· Supports video wall installations from 1x2 to 4x4 screens.
o Displays can be rotated 180 and 270°.
· Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for managed network switch.)
· Support for Point-to-Many or Many-to-Many connections requires a managed Gigabit network switch with IGMP support and Jumbo frame support.
o Manage transmitter/receiver connections and video wall configuration with web interface or network switch that supports VLAN.
o Each VLAN acts as a separate HDMI Over IP Channel on the network.
· When using multiple remote units, there are two USB control modes - Exclusive Mode and Sharing Mode.
o USB Exclusive Mode: Only one remote unit can have USB control over the source computer at any time.
o USB Sharing Mode: Multiple remote units share the control of the source computer.
o Up to 5 USB devices will be recognized by the computer.
· Customizable EDID table on local unit.
· Supports the DDC2B protocol.
· Easily expandable – add receivers as you add control stations.
· Integrated mounting brackets for easy surface/wall mounting.